Set up an internet access point for data calls
1. Select >
Tools
>
Settings
>
Connection
>
Access points
.
2. Select
Options
>
New access point
to create a new access point, or select an existing access point from the list and then
Options
>
Duplicate access point
to use the access point as a basis for the new one.
3. Define the following settings.
•
Connection name
— Enter a descriptive name for the connection.
•
Data bearer
— Select
Data call
or
High speed (GSM)
.
•
Dial-up number
— Enter the modem telephone number of the access point. Use + before international numbers.
•
User name
— Enter your user name if required by the service provider. User names are often case-sensitive and provided
by your service provider.
•
Prompt password
— Select
Yes
to enter your password each time you log into a server or
No
to save the password in your
device memory and automate the login.
•
Password
— Enter your password if required by the service provider. The password is often case-sensitive and provided
by the service provider.
•
Authentication
— Select
Secure
to send your password always encrypted or
Normal
to send your password encrypted
when possible.
•
Homepage
— Enter the web address of the page you want to display as the home page when you use this access point.
•
Data call type
— Select
Analogue
,
ISDN v.110
, or
ISDN v.120
.
•
Maximum data speed
— Select the limit to apply to the transfer speed. If you select
Automatic
, the data transfer rate is
determined by the network and may be affected by network traffic. Some service providers may charge more for higher
data rates.
C o n n e c t i v i t y
© 2007 Nokia. All rights reserved.
47
4. After defining the basic settings, select
Options
>
Advanced settings
to define the advanced settings or
Back
to save the
settings and exit.